Induction Heater of rod ends SOT 250/4-6 of output series 250 kW

Induction Heater of rod ends SOT 250/4-6 of output series 250 kW

Induction heater made for MSV Metal Studénka, a.s. company, is used for induction heating of rod ends with circular cross-section up to forging temperature. It consists of input mechanisms, heater box, inductor, frequency converter and three-phase transformer.
Induction heater is designed in such a way that up to three rod ends can be heated at one time. The operator puts the rods manually into the individual inductor sections on the adjustable stop which determines the length of the heated part. By pushing the rod to the adjustable stop, the indicator at the respective inductor opening lights up and at the same time the timer of the heating time for the respective inductor section is switched on. When the required temperature has been reached the indicator above the respective coil lights up and the stop pushes the rod with its heated end out of the inductor to the point where it is removed for further processing.
The inductors are connected with inlet and oulet cooling water by means of quick couplers which enables quick exchange for another type. It is not necessary to discharge the cooling water from the inductors into the sewer system and, thereby, the operating costs of the cooling are reduced. When the main switch is on, the inductors are automatically connected to electricity.
The heater is controlled by Programmable Logic Controller (PLC) made in Siemens. The temperature of each heated rod end is measured by a non-contact temperature gauge UPF V. The induction heater is operated from the control box with buttons and the communication panel. Heating parameters (required temperature, output, etc.) are set on the communication panel. All failures of the heater are displayed in text on this panel, including the instructions for troubleshooting.

 

Basic technical parameters SOT 250/4-6

Heated material magnetic steel
Dimensions of rods Ø D [mm] 15 - 75
length l [mm] 500 - 1500
length of heated part l [mm] 50 - 300
Output [kW] 250
Maximum heated amount [pcs/h] 150
Rated output temperature of heated rod end [°C]  1200

News

PF 2019

14.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...

Mid-frequency Induction Heater SOP 700/5-A130

23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...

VP 1600 Bin Unloader

14.3.2018 The VP 1600 bin unloader is designed for the transfer of venting stems from a pallet bin. This equipment can also be used for transferring other product from pallet bins, as long as the weight of each piece does more...

Compact Mid-frequency Heater KSO 630/2,1-C55

21.2.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

Compact Mid-frequency Heater KSO 630/3-C55

11.1.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

PF 2018

11.12.2017 Thank you for your cooperation in 2017 and wish you many personal and work achievements in 2018. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2018! more...

links: MARTENZIT, ŠMERAL BRNO, KOMAP, Šroubárna Kyjov, ŠKODA AUTO, OSTROJ, VÍTKOVICE CYLINDERS, MSV Metal Studénka, Kovárna VIVA, ŽĎAS
made by Pavlíček.cz