- Home
- Products
- Request
- References
- About us
- Contact
This heater series is designed for induction heating of cross-sectionally round steel billets up to forging temperatures. The first part of this system is the bin unloader, which handles emptying of the bins into the vibratory drum feeder. The billets leave the drum feeder oriented lengthwise and consecutively to a conveyor with a pneumatic jaw mechanism. These jaws advance the billets toward the inductor opening. The heater is also equipped with a jaw extractor for hot billets leaving the inductor, which removes them and sorts them into one of three categories. Properly heated pieces are placed on the delivery conveyor, and underheated and overheated are sorted to two pallet bins. Heater control is handled by an Siemens programmable logic controller (PLC). The temperature of each heated piece is measured with a non-contact pyrometer and the time/date stamp and temperature value can be saved to the PLC memory. The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive PLC display. The heater parameters (desired temperature, power level, temperature ranges, employee code, etc) are all set on the PLC display. This same display also communicates any system faults to the operator.
Heated Material | magnetic steel | |
Billet Dimensions | Ø D [mm] | 82 |
Length l [mm] | 410 | |
Power [kW] | 630 | |
Maximum Process Capacity [kg/h] | 1260 | |
Billet Delivery Temperature [°C] | 1250 |
10.12.2020 Thank you for your cooperation in 2020 and wish you many personal and work achievements in 2021. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2021! more...
20.2.2020 Induction annealing machines are designed for heat treatment of welded joints to... more...
10.12.2019 Thank you for your cooperation in 2019 and wish you many personal and work achievements in 2020. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2020! more...
27.6.2019 The world's largest event in the field of heating and processing metals The Bright World of Metals 2019, held from 25th to 29th June 2019, opened its gates again after not being held for four years. more...
10.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...
23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...
Induction annealing machines are designed for heat treatment of welded joints to...
more...Induction heating technology is particularily advantageous for spot and surface
more...We provide repass, repairs and reconditioning of induction heaters, frequency converters, inductors ...
more...Induction heating can be simulated very precisely by computer technology. ...
more...Feeding systems handle the manipulation of billets to the entrance of an inductor
more...Thyristor Frequency Converters used in induction heating, hardening, smelting.
more...