COMPLETE EQUIPMENT FOR INDUCTION HEATING

SOP 250/6-A30 P/L/T Mid-frequency Heater, Power Class 250 kW

This heater is designed for the induction heating of round or square-shaped (cross-sectionally) steel billets to forging temperatures.  It is designed for manual placement of the billets with the ability to place more billets at one time into the angled feed chute.  heater control is handled by an Allen-Bradley programmable logic controller (PLC). The temperature of each heated piece is measured with a non-contact pyrometer and the time/date stamp and temperature value can be saved to the PLC memory.  Furthermore, the heater is installed with a pair of retraction jaws and a hot billet sorter that will re-direct improperly heated pieces (overheated or underheated) to prevent them from continuing on to the press. The operator interfaces with the induction heater using the control panel which includes push-buttons and PLC display. 

Basic Technical Parameters SOP 250/6-A30 P/L/T

Heated Material magnetic steel
Billet Dimensions Ø D, square (one side) D [mm] 30 - 80
Length l [mm] 1,2 D - 300
Power [kW]  250
Maximum Process Capacity [kg/h]  580
Billet Delivery Temperature [°C]  1250

Tyto webové stránky využívají soubory cookies pro vylepšení funkcí webových stránek, analýze využívání webových stránek a cílení na návštěvníky stránek.