ITO 401/2,5-A Mid-frequency Induction Heater (repase)

ITO 401/2,5-A Mid-frequency Induction Heater (repase)

This heater was reconstructed for the Škoda Auto Mladá Boleslav Company (cell #9) and is designed for the induction heating of cross-sectionally round billets up to forging temperatures.  During its reconstruction, pneumatic, cooling and electrical components were all completely upgraded. The new heater is controlled by a Siemens programmable logic controller (PLC). The re-designed gravitional chute allows for creating a feedstock in front of the pneumatic feed piston.  Inductor connections were completed re-designed.  This particular change uses a new inductor construction design, which greatly reduces the time needed for inductor change-outs (to about 10 mins). The temperature of each heated piece is measured with a non-contact pyrometer and the time/date stamp and temperature value can be saved to the PLC memory.  Furthermore, the heater is installed with a hot billet sorter that re-directs improperly heated pieces (overheated or underheated) to prevent them from continuing on to the press. The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive PLC display. The heater parameters (desired temperature, power level, temperature ranges, employee login, etc) are all set on the PLC display. This same display also communicates any faults in the induction heating system to the operator.

Basic Technical Parameters ITO 401/2,5-A

Heated Material magnetic steel
Billet Dimensions Ø D,  [mm] 46 - 60
Length l [mm] 1,2D - 300
Power [kW] 400
Frequency [kHz]  1,3 - 4
Maximum Process Capacity [kg/h] 800
Billet Delivery Temperature [°C] max. 1299


Induction Annealing Equipment

20.2.2020 Induction annealing machines are designed for heat treatment of welded joints to... more...

PF 2020

10.12.2019 Thank you for your cooperation in 2019 and wish you many personal and work achievements in 2020. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2020! more...

We visited the fair in Düsseldorf

27.6.2019 The world's largest event in the field of heating and processing metals The Bright World of Metals 2019, held from 25th to 29th June 2019, opened its gates again after not being held for four years. more...

PF 2019

10.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...

Mid-frequency Induction Heater SOP 700/5-A130

23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...

VP 1600 Bin Unloader

14.3.2018 The VP 1600 bin unloader is designed for the transfer of venting stems from a pallet bin. This equipment can also be used for transferring other product from pallet bins, as long as the weight of each piece does more...

made by Pavlíč