- Home
- Products
- Request
- References
- About us
- Contact
This heater is designed for the induction heating of round or square-shaped (cross-sectionally) steel billets to forging temperatures. It is designed for manual placement of the billets with the ability to place more billets at one time onto the feeding conveyor. heater control is handled by an Allen-Bradley programmable logic controller (PLC). The temperature of each heated piece is measured with a non-contact pyrometer and the time/date stamp and temperature value can be saved to the PLC memory. Furthermore, the heater is installed with a pair of retraction jaws and a hot billet sorter that will re-direct improperly heated pieces (overheated or underheated) to prevent them from continuing on to the press. The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive PLC display. The heater parameters (desired temperature, power level, temperature ranges, employee code, etc) are all set on the PLC display. This same display also communicates any faults in the induction heating system to the operator.
Heated Material | magnetic steel | |
Billet Dimensions | Ø D, square (one side) D [mm] | 55 - 130 |
Length l [mm] | 1,2 D - 300 | |
Power [kW] | 630 | |
Frequency [kHz] | 1,5 | |
Maximum Process Capacity [kg/h] | 1500 | |
Billet Delivery Temperature [°C] | 1250 |
10.12.2020 Thank you for your cooperation in 2020 and wish you many personal and work achievements in 2021. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2021! more...
20.2.2020 Induction annealing machines are designed for heat treatment of welded joints to... more...
10.12.2019 Thank you for your cooperation in 2019 and wish you many personal and work achievements in 2020. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2020! more...
27.6.2019 The world's largest event in the field of heating and processing metals The Bright World of Metals 2019, held from 25th to 29th June 2019, opened its gates again after not being held for four years. more...
10.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...
23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...
Thyristor Frequency Converters used in induction heating, hardening, smelting.
more...Induction heating technology is particularily advantageous for spot and surface
more...Feeding systems handle the manipulation of billets to the entrance of an inductor
more...Induction annealing machines are designed for heat treatment of welded joints to...
more...Induction heating can be simulated very precisely by computer technology. ...
more...We provide repass, repairs and reconditioning of induction heaters, frequency converters, inductors ...
more...