KSO 250/8-B Compact Mid-frequency Heater, Power Class 250 kW

KSO 250/8-B Compact Mid-frequency Heater, Power Class 250 kW

This heater series is designed for induction heating of square or round cross-sectional steel billets up to forging temperatures.  One part of this system is the bin unloader, which handles emptying the bins into the vibratory interfeeder.  The interfeeder automatically regulates the level of billets in the drum feeder (about 400 kg).  Billets leave the drum feeder oriented lengthwise and consecutively to a conveyor with a set of pneumatic jaws.  These jaws feed new billets into the inductor.  Billets can leave the inductor one of two ways:

  1. Gravitationally - this is rather designed for shorter billets.  The billets fall into a fixed chute.
  2. Roller extractor - must be manually set in place for longer billets just after the inductor exit. This helps guide the billets leaving the inductor in such a manner that that billet exit angle doesn't change until the entire billet is clear of the inductor core.

For both exit systems, it is possible to use a billet separator which functions to separate billets which are occasionally stuck to each other.  Furthermore, the heater is equipped with a hot billet sorter, which blocks improperly-heated billets (either underheated or overheated) from being delivered to the press.  Heater controls are handled by a Siemens programmable logic controller (PLC).  The temperature of each billet is measured by a non-contact pyrometer and the date/time stamp and temperature value can be stored in the PLC memory.  The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive display.  The heater parameters (desired temperature, power level, temperature ranges, employee login, etc) are all set on the PLC display.  This same display also communicates any faults in the induction heating system to the operator.

Basic Technical Parameters KSO 250/8-B

Heated Material magnetic steel
Billet Dimensions Ø D [mm] 20 - 60
Length l [mm] 1,3 D - 250
Power [kW]  250
Frequency [kHz]  8
Maximum Process Capacity [kg/h]  600
Billet Delivery Temperature [°C]  1250

News

VP 1600 Bin Unloader

14.3.2018 The VP 1600 bin unloader is designed for the transfer of venting stems from a pallet bin. This equipment can also be used for transferring other product from pallet bins, as long as the weight of each piece does more...

Compact Mid-frequency Heater KSO 630/2,1-C55

21.2.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

Compact Mid-frequency Heater KSO 630/3-C55

11.1.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

PF 2018

11.12.2017 Thank you for your cooperation in 2017 and wish you many personal and work achievements in 2018. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2018! more...

Compact Mid-frequency Heater KSO 800/1,2-C50

8.12.2017 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

Transistor frequency converter TRMK-R 50/15

30.11.2017 Transistor frequency converter has been made for THK RHYTHM AUTOMOTIVE GmbH. Together with a mid-frequency transformer and an appropriate inductor it is used for induction heating of the ends more...

links: MARTENZIT, ŠMERAL BRNO, KOMAP, Šroubárna Kyjov, ŠKODA AUTO, OSTROJ, VÍTKOVICE CYLINDERS, MSV Metal Studénka, Kovárna VIVA, ŽĎAS
made by Pavlíček.cz