COMPLETE EQUIPMENT FOR INDUCTION HEATING

KSO 250/4-C30 Compact Mid-frequency Heater, Power Class 250 kW

This heater series is designed for induction heating of round (cross-sectionally) steel billets up to forging temperatures. One part of this system is the bin unloader, which emptying the material bins into the vibratory drum feeder.  The billets leave the vibratory drum feeder oriented lengthwise and consecutively to a conveyor with a roller mechanism.  These rollers are driven and their rotation speed can be adjusted on the control panel.  The roller mechanism feeds the billets into the inductor.  Billets can leave the inductor one of two ways:

  1. Gravitationally - this is method is preferred for shorter billets.  The billets fall into a fixed angled chute.
  2. Roller extractor -  for longer billets, must be manually set in place just after the inductor exit. This helps guide the billets leaving the inductor so that that billet exit angle doesn't change until the entire billet is clear of the inductor core.

For both exit systems, it is possible to use a billet separator which functions to separate billets which are occasionally stuck to each other.  Furthermore, the heater is equipped with a hot billet sorter, which blocks improperly-heated billets (either underheated or overheated) from being delivered to the press.  heater control is handled by a Unitronics programmable logic controller (PLC).  The temperature of each billet is measured by a non-contact pyrometer and the date/time stamp and temperature value can be saved to the PLC memory.  The operator interfaces with the induction heater using the control panel which includes push-buttons and an PLC interactive display.  The heater parameters (desired temperature, power level, temperature ranges, employee code, etc) are all set on the PLC display. This same display also communicates any faults in the induction heating system to the operator.

Basic Technical Parameters KSO 250/4-C30

Heated Material magnetic steel
Billet Dimensions Ø D [mm] 20 - 60
Length [mm] 1,2 D - 300
Power [kW]  250
Frekvence [kHz]  1,3 - 4
Maximum Process Capacity [kg/h]  550
Billet Delivery Temperature [°C] 1250

Tyto webové stránky využívají soubory cookies pro vylepšení funkcí webových stránek, analýze využívání webových stránek a cílení na návštěvníky stránek.