- Home
- Products
- Request
- References
- About us
- Contact
This heater is designed for the induction heating of cross-sectionally round billets to forging temperatures. It is equipped with a transistor-based converter. It includes an automatic billet feeder supplied by billets that are placed into the material hopper located on the plate feeder. Control of the entire system is handled by a Siemens programmable logic controller (PLC). Each billet's temperature is measured by a pyrometer. Furthermore, the heater is equipped with a hot billet sorter, which blocks improperly-heated billets (either underheated or overheated) from being delivered to the press. The operator interfaces with the induction heater using the control panel which includes push-buttons and an interactive display. The heater parameters (desired temperature, power level, temperature ranges, employee login, etc) are all set on the PLC display. This same display also communicates any faults in the induction heating system to the operator.
Heated Material | magnetic and non-magnetic steel | |
Billet Dimensions | Ø D [mm] | 15 - 22 |
Length l [mm] | 1,4 D - 40 | |
Power [kW] | 100 | |
Frequency [kHz] | 20 | |
Maximum Process Capacity [kg/h] | 220 | |
Billet Delivery Temperature [°C] | 1100 |
10.12.2020 Thank you for your cooperation in 2020 and wish you many personal and work achievements in 2021. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2021! more...
20.2.2020 Induction annealing machines are designed for heat treatment of welded joints to... more...
10.12.2019 Thank you for your cooperation in 2019 and wish you many personal and work achievements in 2020. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2020! more...
27.6.2019 The world's largest event in the field of heating and processing metals The Bright World of Metals 2019, held from 25th to 29th June 2019, opened its gates again after not being held for four years. more...
10.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...
23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...
Induction heating can be simulated very precisely by computer technology. ...
more...Induction annealing machines are designed for heat treatment of welded joints to...
more...We provide repass, repairs and reconditioning of induction heaters, frequency converters, inductors ...
more...Induction heating technology is particularily advantageous for spot and surface
more...Feeding systems handle the manipulation of billets to the entrance of an inductor
more...Thyristor Frequency Converters used in induction heating, hardening, smelting.
more...