- Home
- Products
- Request
- References
- About us
- Contact
Transistor frequency converter was made for company Peikko Slovakia s.r.o.. Together with a mid-frequency transformer and an appropriate inductor it is used for induction heating of rods made of magnetic steel.
Each inductor has got two holes to put the cold ends of the rods in. They are inserted by the operator alternately by one end into the free inductor hole. The light signalling indicates that the required temperature has been reached. The rod with the heated end has to be immediately put out of the inductor by the operator. If the operator does not put the rod out, the output of the frequency converter decreases and the temperature is kept constant.
The operation of the frequency converter is ensured by operating system consisting of regulator, converters and Programmable Logic Controller (PLC). The temperature of the heated rod end is measured by a non-contact thermomether UPF IV. The converter is operated with buttons and a communication panel placed on the door of the frequency converter. Heating parameters are set on the communication panel where all failures of the heater are displayed in text, including the instructions for troubleshooting.
Nominal input values | ||
Power Input [kVA] | 54 | |
Input voltage [V] | 3 x 400 | |
Frequency [Hz] | 50 - 60 | |
Cooling water | ||
Consumption [m3/h] | 1,2 | |
Input temperature [°C] | max. 32 | |
Input pressure [MPa] | max. 0,4 | |
Pressure loss [MPa] | 0,2 | |
Maximum warming thru loop [K] | 13 | |
Nominal output values | ||
Output [kW] | 40 | |
Nominal output voltage [V] | 200 | |
Frequency [kHz] | 14 | |
Other parameters | ||
Dimensions (d x š x v) [mm] | 1100 x 1310 x 1275 | |
Weight [kg] | 200 | |
Cabinet | IP 32 | |
Color | RAL 7035 | |
Technical parameters of heated material | ||
Heated material | magnetic steel | |
Dimensions of rods | Ø D [mm] | 10 - 40 |
length of heated part l [mm] | 40 - 90 | |
Maximum heated amount [kg/h] | 60 | |
Rated output temperature of heated rod end [°C] | 1100 |
10.12.2020 Thank you for your cooperation in 2020 and wish you many personal and work achievements in 2021. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2021! more...
20.2.2020 Induction annealing machines are designed for heat treatment of welded joints to... more...
10.12.2019 Thank you for your cooperation in 2019 and wish you many personal and work achievements in 2020. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2020! more...
27.6.2019 The world's largest event in the field of heating and processing metals The Bright World of Metals 2019, held from 25th to 29th June 2019, opened its gates again after not being held for four years. more...
10.12.2018 Thank you for your cooperation in 2018 and wish you many personal and work achievements in 2019. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2019! more...
23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...
We provide repass, repairs and reconditioning of induction heaters, frequency converters, inductors ...
more...Induction heating can be simulated very precisely by computer technology. ...
more...Thyristor Frequency Converters used in induction heating, hardening, smelting.
more...Induction annealing machines are designed for heat treatment of welded joints to...
more...Induction heating technology is particularily advantageous for spot and surface
more...Feeding systems handle the manipulation of billets to the entrance of an inductor
more...