COMPLETE EQUIPMENT FOR INDUCTION HEATING
Thyristor frequency converter has been made for Škoda Auto a.s., Mladá Boleslav. Together with three-phase separating transformer and the load of a parallel oscillatory circuit, which is induction billet heater SOP 1000/1,5/0,8, it is used for induction heating of steel billets up to forging temperature.
Thyristor frequency converter consists of input power circuit breaker, controlled rectifier, smoothing choke, current inverter, and overvoltage protections. The operation of the frequency converter is ensured by operating system consisting of regulator, converters and Programmable Logic Controller (PLC). Internal water cooling system is used for cooling electronic and other parts of power circuits of frequency converter.
| Nominal input values (power circuits) | ||
| Power Input [kVA] | 1195 | |
| Input voltage from separating transformer [V] | 3 x 525 | |
| Frequency [Hz] | 50 | |
| Nominal input values (control circuits) | ||
| Power Input [kVA] | 3 | |
| Voltage [V] | 3 x 400 | |
| Frequency [Hz] | 50 | |
| Cooling water (external cooling loop) | ||
| Consumption [m3/h] | 9 | |
| Input temperature [°C] | max. 32 | |
| Input pressure [MPa] | max. 0,4 | |
| Pressure loss [MPa] | 0,12 | |
| Maximum warming thru loop [K] | 5 | |
| Cooling water (internal cooling loop) | ||
| System capacity [l] | 25 | |
| Nominal output values | ||
| Output [kW] | 1000 | |
| Nominal output voltage [V] | 800 | |
| Frequency [kHz] | 0,5 - 1,5 | |
| Ostatní parametry | ||
| Dimensions (d x š x v) [mm] | 2415 x 830 x 2100 | |
| Weight [kg] | 1500 | |
| Cabinet | IP 43 | |
| Color | RAL 7035 | |
