Vibratory feeders VZ 1300, VZ 1800

Vibratory feeders VZ 1300, VZ 1800

Our VS 1300 and VZ 1800 vibrating feeders handle the automatic billet feeding for induction heating systems.

The vibrating feeder consists of a cylinder-shaped tank with a feeding path on the internal wall of the tank. The tank assembly is solidly connected to two rotating vibrators and embedded on a spring array. During operation, the billets are carried up along the feeding path. Their positioning on the feeding track gradually changes as they travel and as they near the outlet, they are lined up one after another, matched in the direction of their longitudinal axis.

Optimal billet effeciency achieved when the feeder is filled up to 3/4 of its volume and by approximately 200 kg a dose.

The feeders are designed in two tank sizes (VZ 1300, VZ 1800) and available in a left or right version (for the output).

Filling the vibratory feeder can be accomplished in one of two ways:

  • Vibratory interfeeder VMZ 2000
  • Bin unloader 2000 or VP 2003

 

Technical specifications
Type VZ 1300 VZ 1800
Input material øD, 4HR side D [mm] 20 - 45 25 - 85
Length l [mm] 50 - 200 80 - 300
min. ratio l/D 1,3 1,3
Billet speed max. [mm/s] 60 60
average [mm/s] 10 - 25 10 - 25
Floorspace required - length x width [mm] 1335 x 1335 1908 x 1908

Loading the VZ 1300/1800 Vibratory Feeder via the VMZ 2000 interfeeder, supplemented with the bin unloader VP 2000

If there is enough space in the forge, the loading process of vibratory feeders VZ 1300 and VZ 1800 is optimal by means of our vibratory interfeeder VMZ 2000. In this arrangement it is possible to unload the whole pallet contents (max. 2000kg) into the interfeeder VMZ 2000 at once, which then provides smooth and consistent loading into the vibratory feeder VZ1300 (VZ1800).

Loading of the VZ 1300/1800 Vibratory Feeder with the VP 2000 Bin Unloader

Loading of the vibratory feeder directly from the bin unloader does not require as much factory floorspace. However, the operator should be present more often so as to monitor the feeder tank level, and prevent overloading.

 

News

Mid-frequency Induction Heater SOP 700/5-A130

23.4.2018 Induction heater made for Řetězárna Česká Třebová Ltd. is used for induction heating of blanks „L" 700 ÷ 1300 mm up to forging temperature. It consists of input and output mechanisms, a heater box, more...

VP 1600 Bin Unloader

14.3.2018 The VP 1600 bin unloader is designed for the transfer of venting stems from a pallet bin. This equipment can also be used for transferring other product from pallet bins, as long as the weight of each piece does more...

Compact Mid-frequency Heater KSO 630/2,1-C55

21.2.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

Compact Mid-frequency Heater KSO 630/3-C55

11.1.2018 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

PF 2018

11.12.2017 Thank you for your cooperation in 2017 and wish you many personal and work achievements in 2018. ROBOTERM Chotěboř wishes you a Merry Christmas and Happy New Year 2018! more...

Compact Mid-frequency Heater KSO 800/1,2-C50

8.12.2017 The heater is used for induction heating of steel billets with circular cross-section up to forging temperature. The thyristor frequency converter is built in the heater box thus the built-up space is saved and losses more...

links: MARTENZIT, ŠMERAL BRNO, KOMAP, Šroubárna Kyjov, ŠKODA AUTO, OSTROJ, VÍTKOVICE CYLINDERS, MSV Metal Studénka, Kovárna VIVA, ŽĎAS
made by Pavlíček.cz