COMPLETE EQUIPMENT FOR INDUCTION HEATING

Mid-frequency Induction Heater SOP 630/2,5-C55 of output series 630 kW

13.8.2017

The heater was made for Ostroj a.s. Opava. It is used for induction heating of steel billets with circular or square-shaped cross-section up to forging temperature. The thyristor frequency converter is in a separate box. The input mechanism enables either fully automatic or manual insertion of cold billets. The manual insertion is used for short billets which, in the automatic mode, are not able to be oriented in the right way.
In the automatic mode the operator puts the pallet with cold billets onto the pallet tippler bed. When the button is pressed the platform of the pallet tippler starts rotating and the billets are gradually poured out into the vibratory container. From it the cold billets are directed (one by one) onto the input conveyor.
In the manual mode the operator puts the billets directly from the palett to the above mentioned input conveyor. It moves the billets to the roller feeder which consists of a lower prismatic pulley and an upper pressure pulley. Both pulleys are driven and their speed can be set up on the communication panel.
The heated billet is pulled out to the output conveyor by means of the separator. It is designed in a way to separate billets which are partly stuck. If the billet is not heated to the right temperature it is shifted with the flap among the overheated or underheated billets. If the billet is heated up to the right temperature it goes on along the outlet conveyor directly to the press.
The temperature of the heated billet is measured by a contactless thermometer UPF IV. The output of the heater and the function of the heated billets separator are regulated according to the temperature value.
The induction heater is controlled by Programmable Logic Controller (PLC) made in Siemens. The operation is done from the control box with buttons and the communication panel. The heating parameters (required temperature, output, temperature limits in etc.) are set up on the communication panel. All failures of the heater are displayed in text on this panel.

Basic Technical Parameters  SOP 630/2,5-C55

Heated Material magnetic steel
Billet Dimensions Ø D  [mm] 40 - 90
Square (one side)D [mm] 40 - 90
Length l [mm] 1,2D - 510
Maximum Process Capacity [kg/h] 1500
Billet Delivery Temperature [°C] max. 1250
 Power [kW]  630
 Frequency [kHz]  0,85 - 2,5

Tyto webové stránky využívají soubory cookies pro vylepšení funkcí webových stránek, analýze využívání webových stránek a cílení na návštěvníky stránek.